Universal Stain Concentrate / Interiors and Exteriors A Special water based liquid stain of high strength and light resistance used to colour directly raw wood as well to Tint Basecoats or Topcoats of the NATURAQUA RANGE. Due to its particular formula the stain can be used for Interior as Exterior projects, keeping a good colour brightness till a max suggested dilution ratio 1-1. Ready for use can be diluted with water, alcohol, acetone and other polar solvents, once dry allows to be overcoated with any type of lacquer waterborne, thinner based or PU.
Concentrated universal liquid dye. For indoor wooden surfaces. Dilutable in water, acetone, alcohol and nitro thinner for the preparation of base colors. It is also used in small percentages to tone lacquers. Perfectly replaces powdered anilines.
Powder stain, widely used in the traditional restoration. Applied in water dispersion, with different amounts depending on the final intensity of the desired tone, it is suitable for local touch up as well as for the colouring of large areas. Only for indoor use.
It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.
It is a waterbased ready to use vehicle, with a special antique effect. Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.
It's the ideal product for staining any kind of wood exalting its structure. For Indoor use. Ready to use and fast drying. Specially formulated to stain raw barewood or stripped wood during restoration, they are usually applied before the traditional final lacquering, giving a pleasant color tone. Highly shiny, they enhances the woodgrain, penetrating deeply.
The Mordant Concentrates are liquid dyes in water-solution suitable for spray and brush painting of wood, special for positive effect colors. They allow to obtain strong enhancement of the grain on conifers. They can be diluted with Borma waterbased vehicles for positive stains. They are miscible with each other, have an exceptional transparency and are endowed with remarkable color consistency. They can be over-painted, treated with oil or wax. In combination with the Borma Coloroil System tinting system it is possible to reproduce all the colors of the Borma Wachs color charts.