High quality paint, ready to use, with excellent elasticity and high filling power. Prevents cracking and detachment.
Suitable for both indoor and outdoor use, even on exotic woods.
Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and weather.
For the preliminary coloring of the surface it is possible to apply the Holz Lasur primer, then proceed with finishing with two coats of Flatting Extra Marine. To implement its durability, Flatting Extra Marine can be directly colored with Oil Pigments.
SPECIAL FOR NAUTICS (INTERNAL / EXTERNAL USE)

Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).

Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.

It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).

.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood.
Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect.
UV filters and special additives make it suitable for outdoor use. R
ecommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.

Recommendations for application:

Apply evenly by brush or roller.

Naturaqua WPC Deck Sealer
• Overcoatable: 2-4 h at 20°C
• Sanding: not necessary
• Approx. yield: 12-16 m2/Lt.
• Final drying time: 6-12 h at 20°C
• Approx. yield: 14-18 m2/Lt.

Treatment based on oils, waxes and natural resins dispersed in water, created for the protection of composite materials, such as WPC, precompressed wood etc.

Quick to dry, it is strongly water- and oil-repellent, allowing to avoid the formation of unpleasant and persistent stains caused by the absorption of oily substances and dirt.

Enriched with UV filters, it penetrates deeply and guarantees a great adhesion and protection of the treated surfaces.

When dry, it permits to create a pleasant natural effect without changing the WPC tone.

Ideal for composite wood

Naturaqua Decking Oil is a mix of emulsified oils in water reinforced with resins to treat wood intended for outdoor environments. Ready for use.
Over time, it deteriorates but does not flake, is easy to apply and has excellent penetration. Produced with the highest quality raw materials, enriched with special UV filters, it guarantees excellent protection against atmospheric agents. Especially for exterior wood. You are advised not to apply on heated wood, or however in direct sunlight. Ready for use, in time it does not flake off. Easy to use, excellent penetration.
Prepared with high quality raw materials, enriched with UV filters additives, the product guarantees an excellent protection from weathering. Special for exteriors.

Mixture of natural oils, zero emissions, special for the protection of exterior wooden surfaces. Enriched with UV filters and preservatives it guarantees a high protection from atmospheric and biological agents. The addition of the catalyst increases its surface performance making it ideal for finishing terraces and decks in exotic wood.
Odorless, it can be customized in the desired color using oil pigments.
Preferably avoid application on overheated substrates or under direct sun. The application of the product must be carried out as uniformly and continuously as possible, without interruptions. After the catalysis, if necessary the mixture can be diluted with Solvoil Plus. To be used with the related catalizzatore.

Catalysis ratio: 30%