Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.
Transparent water base for the treatment of all types of wooden parquet. Special for the pre-finishing treatment with Naturaqua Parkettlack. For interior. Ready to use as a single-component product, it can also be catalysed with the Borma 4100-2K catalyst for water-based lacquers, in a ratio of 10: 1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply both by brush and roller.
Water-based finish for parquet. Ecological and odorless, it guarantees excellent levels of resistance and protection. Easy to apply by roller, brush or spray. Single component, it can be catalyzed with NAT4099-K
Transparent base-finish product based on vegetable oils, resins and waxes. Characterized by a rapid drying, it allows to obtain an effective and lasting protection from trampling and stains. It combines hardness and resistance to a natural effect. Suitable for parquet and all interior surfaces. Available in different gloss levels, it enhances the natural beauty of wood. Recommended application in two or three coats, with a roller, brush or rag, on rough wood or in any case free of old paint residues. A background coloring can be obtained with Grundieroel Coloroil .
Available also in the waxy matt version: Hardwax Parquet Oil Quick, natural matt effect.
Cleaning with neutral detergents such as Parkettreiniger, maintenance with wax, also as a kit: Kit 1 or Kit 2.
Mixture of precious natural oils reinforced with high quality resins for finishing untreated wooden surfaces. It gives an excellent resistance to stains and trampling. It does not need special funds and is ready for use. The 1030 matt waxy natural version presents a traditional formula with low viscosity and rapid drying. Applicable by brush, roller, rag, spray or in industrial plants. Always ensure adequate ventilation of the treated areas to allow proper oil drying. Indicative yield: 12-24 m2 / Lt.
Water-based two components finish for mobili. Ecological and odorless, it guarantees excellent levels of resistance and protection. Easy to apply by roller, brush or spray. To be used with the related catalyst.
For the glossy version: NAT4107-2K-90 (CATALYST FOR 2K NATURA PARKETTLACK80-90 GLOSS)
For all others: NAT4099-2K (CATALYST FOR WATERBASED LACQUERS)
Finishing oil for interiors with a natural matt effect, characterized by low yellowing. Available in white and transparent. It allows to obtain full finishes or decapé effects on furniture, floors and interior wooden surfaces in general. Fast drying formulation.