Classic protective and decorative impregnating agent, for interiors and exteriors, odorless, with medium dry residual and easy to apply. It gives color to the wood, enhancing its structure. Contains UV filters and additives that provide effective protection against harmful wood agents. Light resistant colours. Good resistance to weathering. Applicable with brush, spray, immersion. Holz Lasur is characterized by an excellent penetration capacity.
- Reduced price
Dekorwachs Lasur Solid is a waxy satin finish for interior and exterior, available in a special series of bright or pastel colors, with excellent covering power and high resistance to light. The product is ready for use, shows excellent elasticity and does not undergo exfoliation phenomena over time. Based on natural oils, high quality resins, UV filters and preservatives, it protects the wood from biological agents and weather. The product is easy to apply, does not drip even when applied on vertical surfaces. Application in two coats is recommended. To renew the coating, simply apply one coat to the clean, dry surface. No sanding needed
Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents. Application in two coats is recommended. For greater resistance of the coating, apply Holz Lasur as a first coat. Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.
Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors.
High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces.
It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)
Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.
High performance waxed high finish impregnating with semi-gloss effect. Impregnates, protects and decorates. It does not need intermediate sanding and is renewed with a simple overlay. Suitable for external wooden cladding, fences, window frames, pergolas, etc.
High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
Waterbased exterior woodstain. It penetrates into the fibers, providing a first protection. Indoor and outdoor use. Complete the working cycle with the desired finish (e.g. Naturaqua Top Gel).
Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.