Transparent water base for the treatment of all types of wooden parquet. Special for the pre-finishing treatment with Naturaqua Parkettlack. For interior. Ready to use as a single-component product, it can also be catalysed with the Borma 4100-2K catalyst for water-based lacquers, in a ratio of 10: 1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply both by brush and roller.
Water-based finish for parquet. Ecological and odorless, it guarantees excellent levels of resistance and protection. Easy to apply by roller, brush or spray. Single component, it can be catalyzed with NAT4099-K
Hardener for the correct catalysis of Borma Wachs water lacquers, to give the treatment high resistance to trampling and dirt. Use: Indoor. T usage temperature: + 5°C / + 30°C. Catalysis ratio = 10: 1. For professional use only. Keep from freezing.
Water-based two components finish for mobili. Ecological and odorless, it guarantees excellent levels of resistance and protection. Easy to apply by roller, brush or spray. To be used with the related catalyst.
For the glossy version: NAT4107-2K-90 (CATALYST FOR 2K NATURA PARKETTLACK80-90 GLOSS)
For all others: NAT4099-2K (CATALYST FOR WATERBASED LACQUERS)
Mixing ratio = 10: 1
Two-component polyurethane varnish, self sealer for parquet. High performance, for professional use. Available in different gloss levels.
|Code 4115-2K-XX + 4115-K||500ml + 500ml|
|Code 4100-2K-XX + 4107-K||1Lt + 1Lt|
|Code 4101-2K-XX + 4107.2,5-K||2,5Lt + 2,5Lt|
|Code 4102-2K-XX + 4108-K||5Lt + 5Lt|
It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.
Special catalyst for high gloss waterbased lacquer (Naturaqua Parkettlack 2k 80-90 gloss).
Bi component varnish for parquet which guarantees maximum opacity and maximum scratch resistance, without the surface polishing phenomena common in opaque finishes. Ideal for all surfaces subject to particular wear. Catalysis ratio 100: 20 with the related catalizzatore.
Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.