Catalyst for special lacquer Ultramax Matt 2k. Catalysis ratio 100:20.

Hardener for the correct catalysis of Borma Wachs water lacquers, to give the treatment high resistance to trampling and dirt. Use: Indoor. T usage temperature: + 5°C / + 30°C. Catalysis ratio = 10: 1. For professional use only. Keep from freezing.

Special catalyst for high gloss waterbased lacquer (Naturaqua Parkettlack 2k 80-90 gloss).

ECO SEAL 300kx is an elastic high-quality sealant special for the sealing of joints between all kinds of varnished woodwork.
Excellent adhesion on porous surfaces, almost odorless, solvent free and free of other dangerous substances, easy to use.
Overcoatable.

USE: suitable for the sealing of joints between separate supports and walls, perfect for hardwood, laminate, parquet, plywood, skirting boards and wooden stairs, windows and frames.
Guarantees the sealing of joints with movement of up to 5-10%. To be applied to a clean, dry, dust- and grease free surface.
Temperature resistance: from -20°C to +75°C.
Application temperature: form +5°C to +40°C.

Catalyst for polyurethane basecoat for parquet 2k PU Parkettlack basecoat.

Two-component polyurethane varnish, self sealer for parquet. High performance, for professional use. Available in different gloss levels.

Catalysis ratio: 1:1

Two-component primer varnish for the treatment of parquet. It allows to realize particularly full and decorative finishes. To be completed with finishing varnish Parkettlack 2k PU

It is used with its catalyst.

Catalysis ratio: 1:1

It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.

Transparent water base for the treatment of all types of wooden parquet. Special for the pre-finishing treatment with Naturaqua Parkettlack. For interior. Ready to use as a single-component product, it can also be catalysed with the Borma 4100-2K catalyst for water-based lacquers, in a ratio of 10: 1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply both by brush and roller.