This is a special 100% polypropylene wax powder ready for use. Solvent-free, inert and odorless, it is formulated to obtain a better anti-slip effect on traditional line finishing oils. Given its particular spherical microstructure it does not significantly alter the aesthetic appearance of the applied product, and being insoluble does not alter color and consistency.
Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).
Interior/Exterior Use Oils in aqueous dispersion reinforced with resin ready for use for interiors and exteriors. Odour-free, the product provides a nongreasy, protective film which is perfectly water-resistant, with a pleasant satin appearance. Easily applied, the oil penetrates deeply to protect the wood from adverse weather conditions and harmful agents, developing tone and natural beauty. Enriched with UV filters. Recommendations for application: Do not apply on heated wood, or in direct sunlight.
Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.
100% pure wood oil extract, obtained by pressing the Tung tree nut. The Wood Oil, dried for exposure to air, forms a transparent cover. It is ideal for finishing wood and preparing paints and oil-based inks. Also suitable for outdoor use. It is indicated on surfaces in contact with food, such as tables and kitchen furniture, cutting boards and more..
It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).
The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended. 1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution. 2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.
.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood. Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect. UV filters and special additives make it suitable for outdoor use. R ecommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.