Ideal for protection and wood colouration Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties. It colours the wood, enhancing the grain. It contains UV filters and antiseptic additives that provide effective protection against fungi and insects. Colours are light resistant and have good resistance to atmospheric agents. Recommendations for application: Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.
Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents. Application in two coats is recommended. For greater resistance of the coating, apply Holz Lasur as a first coat. Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.
High quality paint, ready to use, with excellent elasticity and high filling power. Prevents cracking and detachment. Suitable for both indoor and outdoor use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and weather. For the preliminary coloring of the surface it is possible to apply the Holz Lasur primer, then proceed with finishing with two coats of Flatting Extra Marine. To implement its durability, Flatting Extra Marine can be directly colored with Oil Pigments. SPECIAL FOR NAUTICS (INTERNAL / EXTERNAL USE)
A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors. Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood. Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application: The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base. The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.
Colorless, non-peeling waterbased finish for wood, based on high-flexibility resins for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m2 / Lt Operating temperature: + 5° C / + 30° C Use: Indoor / Outdoor With UV filters. The precious substances that compose it combined with UV filters, prevent the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application. It does not contain Lindane and PCP
Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.
3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.
(Interior/Exterior use) An alkyd-urethane based wax finish offering long term durability for interiors and exteriors. It enhances the wood grain with natural and bright colours, deeply penetrating the wood. Water repellent, breathable and containing UV filters it protects the wood from atmospheric agents. Additionally, it contains antiseptic additives to protect the wood against harmful biological agents. Application of two coats is recommended. To renew the coating, simply apply a coat on the dry and clean, preliminary sanded surface. Recommendations for application: To enhance coating performances, apply Holz Lasur as a first coat..
High performance waxed high finish impregnating with semi-gloss effect. Impregnates, protects and decorates. It does not need intermediate sanding and is renewed with a simple overlay. Suitable for external wooden cladding, fences, window frames, pergolas, etc.