ECO SEAL 300kx is an elastic high-quality sealant special for the sealing of joints between all kinds of varnished woodwork.
Excellent adhesion on porous surfaces, almost odorless, solvent free and free of other dangerous substances, easy to use.
Overcoatable.

USE: suitable for the sealing of joints between separate supports and walls, perfect for hardwood, laminate, parquet, plywood, skirting boards and wooden stairs, windows and frames.
Guarantees the sealing of joints with movement of up to 5-10%. To be applied to a clean, dry, dust- and grease free surface.
Temperature resistance: from -20°C to +75°C.
Application temperature: form +5°C to +40°C.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

This waterbased product lightens the colour of raw wood and neutralises the effect of the two aging vehicles Holz Antix 2008 and Holz Antix 2010, returning ing the colour back to the original one.
To avoid unwanted effects, we recommend overcoating with products from our Parquet Oil Range and afterwards, if required, apply a waterbased finish.
Recommendations for application:
Apply the product on raw wood or on surfaces that were treated with Holz Antix 2008 or 2010 using synthetic brushes or sponges or, on wide areas, using a spreader.
A preliminary test is always recommended to verify the result.
Suitable also for use on oak wood.
Approx. yield: 20-30 m²/Lt.

Special oil for raw wood. Neutral or colored, it is an excellent base in the oil finishing cycles of furniture and floors. Allows to dye easily and evenly over large areas. Colors resistant to light.

An ecological, hypoallergenic and sanitizing double-action formula based on precious waxes and high-tech polymer dispersed in water.

It is VOC-free, easy-to-use, evenly sets, rapidly dries and restores the tone, flexibility and resistance to wood flooring, thus protecting it.

The sanitizing function is granted by controlled release of Silver ions incapsulated into inorganic nanostructured crystals.

Recommendations for application:

Apply evenly and avoid overlapping. Wait for complete drying.
Approx. yield: 60-70m2/Lt.

According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product.

Waterbased Sanitizing and Regenerative Polish for Wood-floors

Eco-compatible finish for the treatment and active cleaning of furniture.

It respects the environment, workers health and protects user's health thanks to its water base, almost non-existent VOC content and iG PURE innovative technology.

Mobilack develops very high levels of protection against wear, abrasion and bacteria thanks to the controlled release of Silver ions.

High performance with the ease of use of a single component and self-regenerating protection.

By need or aim, Mobilack can be further improved in performances by adding its specific hardener,(two component).Hardener addition ratio is 10%.

Available in gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%.

Recommendations for application:

The product can be applied by Brush, Spray or Roller directly on sanded raw wood or on water-based or oil-based basecoats.

It can be applied on Borma Oil finishes as well, prior a proper sanding.

Approx yield: 10-14 m2/Lt.

Sanitizing waterbased Furniture lacquer

Water-based high resistance eco-friendly lacquer ideal for the treatment and active cleaning of wooden floors.

It develops high levels of performance against wear and abrasion, as the innovative iG PURE technology grants additional sanitary protection.

Suitable for all types of wood, being self-sealer it does not necessarily require a specific primer.

Latest generation solution, self-regenerating protection with controlled Silver ions release.

Ready for use, (one component), can be easily spread on any treated surface.

On demand it can be further improved in performance by adding its specific hardener, (two component).

Hardener addition ratio is 10%.

Available in gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%.

Recommendations for application:

The product can be applied by brush or roller directly on sanded raw wood or on water-based, oil-based basecoats or oil-based finishes from Borma range.

Approx. yield: 10-14 m2/Lt

Sanitizing waterbased Parquet lacquer

Natural oil based treatment, reinforced with high quality resins, for the finishing and active cleaning of wooden floors.

It provides an excellent resistance to stains and wear and is enhanced with iG PURE technology of controlled Silver ions release.

It does not need specific basecoats and is ready-to-use.

Available in the following gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%. Latest generation solution, self-regenerating protection, high viscosity.

Not flammable, free form any transport limitation.

Recommendations for application:

The product can be applied by brush, roller, rag or spray.

Always provide proper ventilation to the treated areas to allow the correct drying process of the oil.