Mixture of natural oils, zero emissions, special for the protection of exterior wooden surfaces. Enriched with UV filters and preservatives it guarantees a high protection from atmospheric and biological agents. The addition of the catalyst increases its surface performance making it ideal for finishing terraces and decks in exotic wood. Odorless, it can be customized in the desired color using oil pigments. Preferably avoid application on overheated substrates or under direct sun. The application of the product must be carried out as uniformly and continuously as possible, without interruptions. After the catalysis, if necessary the mixture can be diluted with Solvoil Plus. To be used with the relatedcatalizzatore.
Transparent protective for metals, even if oxidized with Cor-Ten method. Easy to apply, it gives a pleasant satin effect. For interior.
It is a two-component VOC-free mixture of oils with excellent performance. For professional use. Its special formulation makes it suitable for catalysis, reducing drying times and increasing surface resistance. When dry, it leaves a thin film, natural to the touch, but protects and nourishes the wood in depth. Thanks to the high solid content, only one coat is usually sufficient to obtain an effective finish with a pleasant natural effect. Perfect for all indoor wooden floors, also suitable for bathroom and kitchen surfaces. To be used with the relative catalizzatore.
The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended. 1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.
Special oil for raw wood. Neutral or colored, it is an excellent base in the oil finishing cycles of furniture and floors. Allows to dye easily and evenly over large areas. Colors resistant to light.