Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.
Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors
High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. The product can also be used as a pre-treatment before impregnating, enamels or oils. Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.
Primer speciale sviluppato per il trattamento di case in legno. NATURAQUA BORMA SHIELD previene efficaciemente gli attacchi da parte di muffe, funghi, insetti e simili durante il periodo di costruzione nel quale la casa viene lasciata senza finitura. Dopo un periodo comune di stagione, NATURAQUA BORMA SHIELD risulta esaurito, ma il legno Ã¨ rimasto protetto mantenendo il suo colore originale ed Ã¨ sufficientemente saturo da non necessitare un fondo aggiuntivo. Con questo prodotto, il legno puÃ² essiccare correttamente e raggiungere il suo volume finale senza essere consumato dagli agenti atmosferici. Adatto a case in legno grezzo, case in legno grezzo pulite, tavole di legno e ponti di legno. Applicazione facile. A base dâ€™acqua, non emana vapore in grado di danneggiare la salute umana e consente lâ€™appicazione sotto pressione.
Transparent water base for the treatment of all types of wooden parquet. Special for the pre-finishing treatment with Naturaqua Parkettlack. For interior. Ready to use as a single-component product, it can also be catalysed with the Borma 4100-2K catalyst for water-based lacquers, in a ratio of 10: 1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply both by brush and roller.
Transparent bottom water-based varnish for varnishing any type of indoor wood. Special for the treatment of the furniture before Naturaqua Mobilack. Yield: 8 - 12 m² / Lt Operating temperature: + 5? ? C / + 30? ? C For interiors. Ready to use as a single-component product, it can also be catalyzed by adding the Borma 4100-2K catalyst for water-based lacquers, in a 10: 1 ratio. Excellent transparency and elasticity, thanks to its easy-to-apply brush texture even on vertical surfaces. Ideal for furniture, doors, skirting boards, paneling.
Ready-to-use base, odorless and environmentaL friendly, easy to apply, recommended for wood, indoors and outdoors.
Of high density, it is recommended for finishing or maintenance cycles of wooden surfaces where an effect of considerable coverage and uniformity is desired, granting correct adhesion of the finish. Fluent and elastic, it is characterized by excellent distension and does not drip.
The Antirust Rust Undercoat is a product ready for use, easy to apply, recommended as a primer for iron, indoors and outdoors.
Of high density, it is recommended for finishing or maintenance cycles of iron surfaces, new or already treated.
Ideal for furniture, gates, fixtures, iron cladding in general.
High coverage Undercoat is a ready-to-use product, easy to apply, recommended for wood, indoors and outdoors. It creates a smoothing and filling layer that facilitates the subsequent application of High Coverage Enamel . Ideal for furniture, paneling, attics, beams, fixtures, fences, wooden houses, boats.