Water-based high resistance eco-friendly lacquer ideal for the treatment and active cleaning of wooden floors.

It develops high levels of performance against wear and abrasion, as the innovative iG PURE technology grants additional sanitary protection.

Suitable for all types of wood, being self-sealer it does not necessarily require a specific primer.

Latest generation solution, self-regenerating protection with controlled Silver ions release.

Ready for use, (one component), can be easily spread on any treated surface.

On demand it can be further improved in performance by adding its specific hardener, (two component).

Hardener addition ratio is 10%.

Available in gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%.

Recommendations for application:

The product can be applied by brush or roller directly on sanded raw wood or on water-based, oil-based basecoats or oil-based finishes from Borma range.

Approx. yield: 10-14 m2/Lt

Sanitizing waterbased Parquet lacquer

It is certified for bio-building, is VOC free and ideal for all polished or recently laid wooden floors, for all types of wood. Specific to treat large areas, it is suggested to apply it with polishing machine. To be used on rough or stained wood indoors, for floors, stairs, beads and furniture in general, it gives an imperceptible protective film that is easy to maintain.
Approx yield: Eco Premium Parquet Oil HS: 16-24m²/Lt

Natural oil based treatment, reinforced with high quality resins, for the finishing and active cleaning of wooden floors.

It provides an excellent resistance to stains and wear and is enhanced with iG PURE technology of controlled Silver ions release.

It does not need specific basecoats and is ready-to-use.

Available in the following gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%. Latest generation solution, self-regenerating protection, high viscosity.

Not flammable, free form any transport limitation.

Recommendations for application:

The product can be applied by brush, roller, rag or spray.

Always provide proper ventilation to the treated areas to allow the correct drying process of the oil.

It is a two-component VOC-free mixture of oils with excellent performance. For professional use. Its special formulation makes it suitable for catalysis, reducing drying times and increasing surface resistance. When dry, it leaves a thin film, natural to the touch, but protects and nourishes the wood in depth. Thanks to the high solid content, only one coat is usually sufficient to obtain an effective finish with a pleasant natural effect.
Perfect for all indoor wooden floors, also suitable for bathroom and kitchen surfaces. To be used with the relative catalyst.<

Single brush application, with 10% or 30% catalysis depending on whether it is medium or high traffic surfaces./p>

Blend of precious oils and waxes, with 100% solid content, suitable for catalysis, which reduces drying times and increases performance.

Matt waxy version, natural effect.

To be used with the related catalyst.