Catalyst for special lacquer Ultramax Matt 2k. Catalysis ratio 100:20.

Linseed oil, filtered and cooked with traditional systems and with the addition of drying agents, without resins. It is ideal for the preparation of oil pigments. It gives a brilliant finish to both raw and stripped wood. Base oil and natural effect finish. It penetrates deeply into the porosity of the wood. Natural and bright effect. Also recommended as a sealant for terracotta and other surfaces before waxing. The treated surface will be soft and delicate, and will need to be restored periodically to maintain its natural beauty.

Natural oil, ideal for the preparation of oil-based pigments. It can be used as a primer and finish for natural-effect wood. It penetrates deeply into the porosity of the wood, giving the surface a bright look. It is necessary to periodically carry out maintenance to keep its beauty intact. For internal use only.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Paint based on natural gypsum and acrylic polymer, suitable for wooden surfaces and wall surfaces. Thanks to its high solid content, it achieves excellent filling, making the substrates homogeneous with a reduced number of applications. Of good spreadability and flexibility, it grants, when sanded, the chance of perfectly smooth finishes. It can be overpainted with waterbased and solvent-based paints, waxes, shellac paints. The colors and the particular formula of Shabby Provenzale make it particularly suitable for obtaining finishes in Provencal style and shabby chic.

Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors.
High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces.
It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)