Non-yellowing high-solids transparent spray. Available in different glosses to restore previous coatings.

For professional use.

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

Water-based dye, ready to use with positive effect (strong highlighting of the wood structure).
It is applied on a rough surface. Special for soft woods, only for interiors.

Water-based wax finish for furniture. To be applied on a rough surface, special for soft woods. Highlight the structure of the wood (positive effect). For interiors only.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

TOUCH UP CASE C1 - Professional

C1- A Service Case includes:

1 box of Softwax fillers in 20 assorted colours

1 box of Profix touch-up dye markers in 10 assorted colours

1 bottle (30ml) of wood detergent

1 bottle (30ml) of Borma Solve

2 Holzspray Touch-up lacquer (400 ml): 1x20%, 1x40%

Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

C1 - C
A Service Case includes:

1 box of Softwax fillers in 20 assorted colours

1 box of Holzmarker colour touch-up markers in

10 assorted colours

1 bottle (30ml) of wood detergent

1 bottle (30ml) of Borma Solve

2 Holzspray Touch-up lacquer (400 ml): 1x20%, 1x40%

Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

C1- D
A Service Case includes:

2 boxes of Hard Wax in 20 assorted colours

1 box of Profix touch-up dye markers in 10 assorted colours

1 Gas Flint Borma gas heating iron for wax fillers

2 Holzspray Touch-up lacquer (400 ml): 1x20%, 1x40%

Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths 1 Plastic Spatula 5 cm

The photos are purely indicative

The C2 Maintenance Kit is suitable for all wooden surfaces.
An impressive and sturdy kit for tackling those annoying small problems often present during assembling and finishing operations.

A small investment for achieving a high standard of quality and customer service and for eliminating the risk of complaints.

The C2 service case includes:

1 Wooden case, 36x46x16 cm
6 Holzmarker retouching opaque markers
6 Profix retouching dyeing pens
2 Softwax box assorted in 20 colours
2 Hard Wax box assorted in 20 colours
1 Holzmasse can, wood filler 250 ml.
1 Holzmasse K2 box, bicomponent filler for wood 250 gr.
1 Borma Solve tank 250 ml.
1 Wood Detergent tank 250 ml.
2 Holzspray spray varnish 400 ml.: 1 opaque, 1 semigloss.
1 Gas Flint Borma, mini fuser for wax fillers.
2 Plastic spatulas cm 5/8
2 Metal spatulas cm 5/8
1 Scraper
3 Measuring cups for mixing
3 Dosing pipettes
10 Working cloths
1 mt. Fine abrasive paper
1 mt. Extra fine abrasive paper
3 Fine grey abrasive buffers (12x14)
3 Extra fine white abrasive buffers (12x14)

CASE C3 - Professional

The C3 Professional Maintenance Kit is suitable for all wooden surfaces. An impressive and sturdy kit for tackling those annoying small problems often present during assembling and finishing operations. An investment for guaranteeing quality standards and customer satisfaction, eliminating any possible risk of complaints.

The C3 service case includes:

1 Wooden case, perfectly functional 46x46x16 cm
8 Holzmarker retouching opaque markers
8 Profix retouching dyeing pens
6 Profix Touch-up pen with extra fine tip
6 Opaque retouching 30 ml bottles
6 Semiopaque retouching 30 ml bottles
6 Holzfarbe, concentrated dye 30 ml.
2 Softwax box assorted in 20 colours.
2 Hard Wax box assorted in 20 colours.
1 Ecostucco box waterborne filler 500 gr.
1 Holzmasse box wood filler 250 ml.
1 Holzmasse K2 box bicomponent wood filler 250 gr.
1 Borma Solve tank 250 ml.
1 Restoration Oil tank 150 ml.
1 Detergent for wood tank 250 ml.
2 Holzspray spray varnish 400 ml.: 1 opaque, 1 semigloss.
Plastic spatulas cm 5/8
2 Metal spatulas cm 5/8
1 Scraper
3 Measuring cups for mixing
3 Dosing pipettes
10 Working cloths
1 mt.Fine abrasive paper
1 mt.Extra fine abrasive paper
3 Fine grey abrasive buffers (12x14)
3 Extra fine white abrasive buffers (12x14)
1 Gas Flint Borma, mini fuser for waxy fillers)