Odourless, light-stable and ecological water-based putty for wood. The white version is also suitable for smoothing plaster. Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.

With Stuccorapido (Soft Wax Filler) you can quickly and safely repair all wood defects, from lacquered, corroded or chipped surfaces.
The restored parts maintain consistency and colour, even if they have been treated with a small amount of the product and with time are not subject to deterioration. Based on natural waxes and mineral pigments, it is an overcoatable and not harmful product for the restoration of wooden surfaces. Equipped with remarkable plasticity, allows quick and easy repairs, even on different materials. It does not grease your hands. Colour-match service available.

Soft wax sticks, 100% solid and non-toxic. Ideal for correcting small scratches and lacks on interior surfaces in wood, laminate, PVC, etc.

Available in several light-resistant colours that can be mixed to each other.To be applied directly on the defect, the excess removable by spatula: Touch up spatula and a soft abrasive pad. Possible overcoating withProfix Graining PenandHolzspray.

Special putty in powder form with wood flour specific for wooden surfaces, can also be used on wall supports. To be mixed with water, it is ideal for grouting wood imperfections and for reconstructing missing parts. It adheres perfectly to all surfaces. Colors resistant to light. Can be overpainted with PU, acrylic, epoxy, UV and water-based paints.

Single-component, fast-drying, solvent-based stucco. Contains wood flour and has great elasticity and filling capacity. For furniture, fixtures and other wooden surfaces.

Filler based on polyester resin, wood flour and special mineral powders, characterized by soft spreadability, high flexibility and easy sanding. Particularly suitable for remaking and grouting details and wooden surfaces. Backgrounds: wood in general. medium-fine Texture.

Sold with catalyst 1970T

It's a ready to use binding resin for the individual preparation of Borma Holzmasse. Pasted together with wood sawdust obtained from sanding, it allows to obtain a spreadable paste easily. The binding resin does not change the original colour of the wood and therefore the paste has the same tone of the wood from which the powder has been obtained. The paste can be tinted over or varnished over with both solvent and water based products.

Ready-to-use binder resin for the individual preparation of quick drying wood putty.
Mixed with wood dust from the sanding process it enables a filler matching the original Colour of the wood to be obtained.
Any customised colour shades can be achieved with the addition of a few drops of the Borma Holzfarbe Wood Concentrate dyes. Use water for thinning/dilution.

Special two-component epoxy-based formulation with glass effect, characterized by an exceptional transparency, suitable for filling cavities and imperfections in various types of materials and for embedding and casting for decorative purposes. Borma Glass 2K is suitable for bonding various materials, including them or with themselves such as: wood, glass, marble, painted materials, etc. (other materials must be verified beforehand) Borma Glass 2K can be colored and / or used as a binder for mixtures. To be used in combination with the related catalyst in ratio 100:40.