Borma Shellac Sanding Sealer Blond is a natural shellac primer product with the finest quality ABTN waxed shellac. Its high dry residue creates the ideal support for the traditional warm and glossy finishes of the style furniture. Amber colour.

It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.

Filler based on polyester resin, wood flour and special mineral powders, characterized by soft spreadability, high flexibility and easy sanding. Particularly suitable for remaking and grouting details and wooden surfaces. Backgrounds: wood in general. medium-fine Texture.

Sold with catalyst 1970T

Acrilyc lacquer, not yellowing, with metallic effect for the invisible and perfect touch-up of scratches and damages on gilded surfaces. Fast drying, resistant to sunlight, allows a quick solution and an easy application.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Non-yellowing high-solids transparent spray. Available in different glosses to restore previous coatings.

For professional use.

Top quality transparent shellac basecoat. Produced with natural dewaxed Shellac, thanks to its transparency, it is ideal as a first coat in wax or shellac treatments on light Pine type woods, etc. Completely formulated with natural products, it is ready to use, fast drying and of considerable adhesion.

MOBlLACK is a traditional self sealing finish for furniture of exceptional hardness and transparency. Quick drying, it enhances the color of the wood, highlighting its natural beauty. Recommended for furniture, doors, skirting boards and other wooden surfaces in general. Ready for use. Applicable by brush or spray, it can be diluted according to the need for use up to a maximum of 50% with turpentine

It's a ready to use binding resin for the individual preparation of Borma Holzmasse. Pasted together with wood sawdust obtained from sanding, it allows to obtain a spreadable paste easily. The binding resin does not change the original colour of the wood and therefore the paste has the same tone of the wood from which the powder has been obtained. The paste can be tinted over or varnished over with both solvent and water based products.

Ready-to-use binder resin for the individual preparation of quick drying wood putty.
Mixed with wood dust from the sanding process it enables a filler matching the original Colour of the wood to be obtained.
Any customised colour shades can be achieved with the addition of a few drops of the Borma Holzfarbe Wood Concentrate dyes. Use water for thinning/dilution.