The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. 
Perfect primer to be used as a pre-treatment before exterior woodstain products, lacquers or oils.
Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

Special waxy impregnant agent with sealing purposes for wooden surfaces that have been bleached with Sbiancante bicomponente.

It is a fast-drying revitalizing lacquer for marble, travertine, stone, granite and agglomerates, which allows to obtain a wet effect, highlighting the color of the materials. For interior or exterior surfaces,polished, brushed and rough. Very easy to apply.

Top quality transparent shellac basecoat. Produced with natural dewaxed Shellac, thanks to its transparency, it is ideal as a first coat in wax or shellac treatments on light Pine type woods, etc. Completely formulated with natural products, it is ready to use, fast drying and of considerable adhesion.

MOBlLACK is a traditional self sealing finish for furniture of exceptional hardness and transparency. Quick drying, it enhances the color of the wood, highlighting its natural beauty. Recommended for furniture, doors, skirting boards and other wooden surfaces in general. Ready for use. Applicable by brush or spray, it can be diluted according to the need for use up to a maximum of 50% with turpentine

It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.

Waterbased Regenerative Treatment for Flooring

Ecological and hypoallergenic formula based on precious waxes and polymer dispersed in water.
It is VOC-free, easy-to-use, evenly sets, rapidly dries and restores the tone and flexibility to a varnished wood flooring.
Renews treated surfaces that will retain clarity, resistance and the ease of cleaning for a longer period of time.

Recommendations for application:
Odourless and colourless.
To be used undiluted on deteriorating surfaces; for normal, daily maintenance it should be diluted with water or added in small amounts (1%) to cleaning water.
Available in glossy, or matt gloss levels.

Recommendations for application:

Apply evenly and avoid overlapping. Wait for complete drying.
Approx. yield: 60-70m2/Lt.

According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product.

Waterbased Sanitizing and Regenerative Polish for Wood-floors