It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.

Ideal for the balanced dilution of oils from the Borma Wachs range. Medium-slow drying. Odorless and free of aromatic compounds.

Wax polish formulated with pure beeswax and carnauba, enriches and nourishes every wood surface. With its white pigments it protects giving an antique effect - pickled to the treated furniture. Ideal for finishes on oak and ash.

Mixture of oils for the treatment and maintenance of the internal surfaces of saunas (benches, coatings and flooring in raw wood) It provides a good water repellency and protects the wood from dehydration, naturally reviving its color and grain. Sauna Oil is applied to untreated, dry and clean wood, with a rag and without excess, whenever necessary. Indicative yield: 8-16m2 / Lt

High solid wax polish in paste, based on beeswax and carnauba, special for restoration / decoration or for application on rough or porous supports, even for encaustic application.

Neutral or colored, it nourishes and protects furniture and paneling. Odorless.

Professional product that combines the main waxes of mineral, animal and vegetable origin in its mixture. The protective capacity is supported by light resistant pigments, which enhance the warmth and color of the wood by hiding any imperfections. Borma Holzwachs nourishes, regenerates, protects and polishes every type of wood, particularly suitable for the finishing and maintenance of fine furniture and parquet. With pure beeswax and carnauba wax. Compliant with standard EN 71.III.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt

Standard
Cod. 0490-90
Cod. 0491-90

Opaco
Cod. 0490-30
Cod. 0491-30

Opaco profondo
Cod. 0490-10
Cod. 0491-10