Hard wax stick, hot melting. 100% solid and non-toxic. Available in more than 90 light-resistant colors that can be mixed together. Ideal for filling scratches and gaps, even on floors and frames exposed to the outside.
It is used by pouring it directly onto the defect by means of a heater from the Borma line: battery, electric o gas. Remove the excess with the proper spatula spatola.

Assorted light colours: 50 white, 65 ash, 05 pine, 40 maple, 42 beech, 06 birch, 10 larch, 54 douglas, 02 light natural oak, 51 light oak.

Assorted dark colours: 66 dark cherry wood, 16 cherry-pearwood, 30 cherry, 62 mahogany, 33 dark mahogany, 58 palisander, 48 medium oak, 52 dark oak, 53 light, walnut, 59 medium walnut, 63 dark walnut

Assorted plain colours: 50 white, 119 lemon yellow, 120 yellow, 122 orange, 125, red, 126 pink, 127 purple, 130 green, 136 pine green, 137 dark green.

Assortied Series RAL2: RAL9005, RAL1017, RAL1028, RAL3020, RAL3000, RAL3004, RAL6005, RAL5012, RAL5002, RAL5003

Colour-Match Service Available

Sold individually or in assortment:

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Satin touch-up paint in bottle with brush. Quick drying, totally covers the surface. The colors are light-resistant and can be mixed together. Also available as transparent in different gloss levels.

Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors.
High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces.
It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Perfect for any type of surface, whether wood or metal, outside as well as inside.
Designed specifically to perform ideally on vertical surfaces.
No dripping.

High coverage Undercoat is a ready-to-use product, easy to apply, recommended for wood, indoors and outdoors. It creates a smoothing and filling layer that facilitates the subsequent application of High Coverage Enamel . Ideal for furniture, paneling, attics, beams, fixtures, fences, wooden houses, boats.

Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents.
Application in two coats is recommended.
For greater resistance of the coating, apply Holz Lasur as a first coat.
Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

Sold one by one, not in package