Hard wax stick, hot melting. 100% solid and non-toxic. Available in more than 90 light-resistant colors that can be mixed together. Ideal for filling scratches and gaps, even on floors and frames exposed to the outside.
It is used by pouring it directly onto the defect by means of a heater from the Borma line: battery, electric o gas. Remove the excess with the proper spatula spatola.

Assorted light colours: 50 white, 65 ash, 05 pine, 40 maple, 42 beech, 06 birch, 10 larch, 54 douglas, 02 light natural oak, 51 light oak.

Assorted dark colours: 66 dark cherry wood, 16 cherry-pearwood, 30 cherry, 62 mahogany, 33 dark mahogany, 58 palisander, 48 medium oak, 52 dark oak, 53 light, walnut, 59 medium walnut, 63 dark walnut

Assorted plain colours: 50 white, 119 lemon yellow, 120 yellow, 122 orange, 125, red, 126 pink, 127 purple, 130 green, 136 pine green, 137 dark green.

Assortied Series RAL2: RAL9005, RAL1017, RAL1028, RAL3020, RAL3000, RAL3004, RAL6005, RAL5012, RAL5002, RAL5003

Colour-Match Service Available

Sold individually or in assortment:

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors.
High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces.
It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Creates a decorative film, water repellent and resistant to atmospheric agents, low yellowing. High density, filling and covering capacity, it is recommended for finishing or maintenance of wood, iron and masonry surfaces.

Ready-to-use high coverage enamel, easy to apply, suitable for all types of backgrounds, indoors and outdoors. Glossy and opaque.

Perfect for any type of surface, whether wood or metal, outside as well as inside.
Designed specifically to perform ideally on vertical surfaces.
No dripping.

Odorless water-based touch-up paint, special for wood. Ready to use, it allows you to permanently correct all imperfections of solid wood without transparency on the grain. Available in ninety stable light colors. Keep from freezing.

Sold one by one, not in package

NATURAQUA WHITE Enamel is a ready-to-use, eco-friendly and odorless product, very easy to apply even vertically, suitable for any type of support, indoors and outdoors with low VOC.
It creates a decorative, water-repellent and weather-resistant film, with low yellowing. Thanks to the special formulation with light-resistant pigments and UV filters, it creates a long-lasting protection. Smooth and elastic, it is characterised by excellent distension and rapid drying, it does not drip. Has an anticorrosive effect.

FIELDS OF APPLICATION
The NATURAQUA WHITE multisurface enamel has a high density, boasts high filling and covering capacity.
It is recommended for finishing or maintenance of wooden, metal surfaces as well as walls. In the 00 gloss version it is perfect for wall use.

Naturaqua Genesis is a ready-to-use water-based covering enamel available as standard in the matt 25 gloss version.
Thanks to the new latest-generation formulation, it adheres to every surface and offers high performance in terms of chemical and mechanical resistance: it is stain-proof, non-yellowing, water-repellent, scratch-proof.

Naturaqua Genesis also stands out for its application characteristics: excellent flow, rapid drying, high coverage in one coat, high levelling power. During the surface preparation phase, it does not require the application of special primers. It is a washable product. The water- based technology makes the product odourless, low VOC emissions and perfect for interior application

For cladding, roofing, windows and fences
Naturaqua Dekorwachs Lasur is a high-solid content, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light.
The product, ready for use, demonstrates excellent elasticity and is fast drying. With a high-quality resin base, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product, is easy to apply and is non-drip.
Recommendations for application: For long term durability a minimum of two coats is recommended by brush or spray application. The level of protection offered by DEKORWACHS LASUR and NATURAQUA DEKORWACHS LASUR is very similar, however , when maintenance is required, the waterbased version requires intermediate sanding between the coats.