Oils in water dispersion reinforced with ready-to-use resins for indoor and outdoor use. Almost odorless, the product attributes a non-greasy, perfectly water-repellent protective film with a pleasantly satin-like appearance. Easy to apply. With UV filters. It is recommended not to apply on overheated wood or under full sunshine.
Polishing detergent for all lacquered and painted surfaces. Designed to eliminate streaks and graying due to the wear and humidity. It deeply sanitizes and restores beauty and shine.
Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).
Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.
Based on essential orange oil and neutral pH, this soap is an excellent cleaner for painted or oil-treated wooden furniture. It effectively removes dirt and grease, without damaging the paints, effectively but at the same time gently, releasing a pleasant orange fragrance. Suitable for daily cleaning.
The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended. 1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.
High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation. Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking. Massage the surface with a brush or brush until the surface is still wet. The result is immediate. If necessary, repeat the operation.
Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.