Oil based product, ready to use, suitable for all wooden surfaces, both indoors and outdoors. It gives water repellency and maintains a pleasantly natural appearance on the surface. Also suitable for immersion. Protects from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not undergo exfoliation and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(es. Decking Oil HD ).

Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.

Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation.
Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking.
Massage the surface with a brush or brush until the surface is still wet. The result is immediate.
If necessary, repeat the operation.

It allows intensive cleaning of the wood, removing stubborn dirt and residues of previous oil-based or impregnating treatments. It is also used to degrease exotic timbers particularly rich in oils and extracts. In this case it is recommended to dilute the product with water 1: 1. Wet the substrate with plenty of water before treatment. Due to the high concentration of active ingredients, Extra Strong Wood Cleaner can alter the natural color of the wood making it darker. To restore the original color of the wood, use Exterior Wood Cleaner later.

It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).

High-performance two-component paint for exterior surfaces. Available in different gloss levels. To be used with the related catalilyst.

Catalysis ratio: 1:1

For professional use..

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.

FIRST AID – A:
1 box of Softwax in 20 assorted colours 1 box of Profix touch-up dye pens in 10 assorted colours, 2 bottles (30ml) of Fixative (1x20%, 1x40%)
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – B:
2 boxes of Hard Wax in 20 assorted colours; 1 box of Holzmarker colour touch-up markers in 10 assorted colours; 1 Gas Flint Borma gas heating iron for wax fillers
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – C:
1 box of Softwax in 20 assorted colours; 1 box of Holzmarker colour touch-up markers in 10 assorted colours, 2 bottles (30ml) of Fixative (1x20%, 1x40%)
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – D:
2 boxes of Hard Wax in 20 assorted colours; 1 box of Profix staining touch-up pens in 10 assorted colours, 1 Gas Flint Borma gas heating iron for wax fillers
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm