Hard wax stick, hot melting. 100% solid and non-toxic. Available in more than 90 light-resistant colors that can be mixed together. Ideal for filling scratches and gaps, even on floors and frames exposed to the outside. It is used by pouring it directly onto the defect by means of a heater from the Borma line: battery, electric o gas. Remove the excess with the proper spatula spatola.

Sold individually or in assortment:

ECOSEAL 500 is a one-component, elastoplastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to medium stress. It is ready to use and effectively seals joints inside and outside, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Good mold resistance.

FIELDS OF APPLICATION
Inside and outside joints, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood.

Practical and easy to handle, it simply requires two AA batteries and allows correct and effective application of the Hardwax touch up sticks

Two-component filler using extra fine wood flour. Easily sandable, it has perfect adhesion on any substrate. Indoor / outdoor use.

1650XX 750 ml. can

1680XX 820 ml. cartridge

Electric fuser with easy-to-use heat dimmer for the correct application of Hardwax filler. Respects colors, does not burn paints. Particularly useful where free flames and sparks are not allowed, as in painting booths. P>

The Borma gas flint is the ideal tool for the application of Hardwax thanks to its robustness, versatility and small size. It is powered by common butane gas and easily rechargeable through the rear valve.

1960D DOSING GUN FOR K2 MDF - Basic
Dispenser for K2 MDF cartidges with stable catalysis ratio. Very easy use

1960P DOSING GUN FOR K2 MDF - with catalysis ratio modifier
Dispenser for K2 MDF cartridges with modifiable catalysis ratio. Extremely useful.

Electric melter with heat regulator (temperature range from approx. 35° to 250 ° C.)
Easy to use for the correct application of hard wax putty.
Respect the colors, do not burn the paints.
Particularly useful where open flames and sparks are not allowed, such as in spray booths. The electrical voltage indicated on the label must correspond to the electrical power supplied