Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

Water-based acrylic sealant, ready to use, transparent.
Super elastic and ready-to-use sealant. Protects the edges of windows and doors from atmospheric agents and moisture absorption. Deep absorption and a high level of water repellency work together to protect windows and doors.

Sold one by one, not in package

A high-performance 2- component, polyurethane based Primer with preservative and insulation properties ideally suited

to resinous woods. Fast drying and with excellent sanding it is perfect for closed / semi-closed pore finishes. The cycle can be

completed with Exterior Wood Lack 2k, Naturaqua Exterior Wood lack 2k or Decking Oil HD.

Recommendations for application:

It can be applied by brush, roller or spray. Suggested for professional use.

Catalysis ratio: 1:1

High-performance two-component paint for exterior surfaces. Available in different gloss levels. To be used with the related catalilyst.

Catalysis ratio: 1:1

For professional use..

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

Two-component filler using extra fine wood flour. Easily sandable, it has perfect adhesion on any substrate. Indoor / outdoor use.

The product is sold with the catalyst which can also be purchased separately.

1650XX 750 ml. can

1680XX 820 ml. cartridge