Mixture of natural oils, zero emissions, special for the protection of exterior wooden surfaces. Enriched with UV filters and preservatives it guarantees a high protection from atmospheric and biological agents. The addition of the catalyst increases its surface performance making it ideal for finishing terraces and decks in exotic wood. Odorless, it can be customized in the desired color using oil pigments. Preferably avoid application on overheated substrates or under direct sun. The application of the product must be carried out as uniformly and continuously as possible, without interruptions. After the catalysis, if necessary the mixture can be diluted with Solvoil Plus. To be used with the relatedcatalizzatore.
Catalyst for Decking Oil 2k, to be used in 100:30 ratio.
Suitable for all types of wood finishes. Ideal for ordinary cleaning of decking, fencing, furniture and other exterior surfaces, oiled or painted. Effectively removes dirt and grease without damaging the wood. Suitable for daily use. Dilute the product in water.
Two-component water-based paint for exteriors. For professional use, it is available in different glosses. Suitable for flooring, furniture, coverings, wooden surfaces in general.
.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood. Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect. UV filters and special additives make it suitable for outdoor use. Recommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.
It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).
The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended. 1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution.
2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.