Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

Non-yellowing high-solids transparent spray. Available in different glosses to restore previous coatings.

For professional use.

This waterbased product lightens the colour of raw wood and neutralises the effect of the two aging vehicles Holz Antix 2008 and Holz Antix 2010, returning ing the colour back to the original one.
To avoid unwanted effects, we recommend overcoating with products from our Parquet Oil Range and afterwards, if required, apply a waterbased finish.
Recommendations for application:
Apply the product on raw wood or on surfaces that were treated with Holz Antix 2008 or 2010 using synthetic brushes or sponges or, on wide areas, using a spreader.
A preliminary test is always recommended to verify the result.
Suitable also for use on oak wood.
Approx. yield: 20-30 m²/Lt.

Top quality transparent shellac basecoat. Produced with natural dewaxed Shellac, thanks to its transparency, it is ideal as a first coat in wax or shellac treatments on light Pine type woods, etc. Completely formulated with natural products, it is ready to use, fast drying and of considerable adhesion.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.

MOBlLACK is a traditional self sealing finish for furniture of exceptional hardness and transparency. Quick drying, it enhances the color of the wood, highlighting its natural beauty. Recommended for furniture, doors, skirting boards and other wooden surfaces in general. Ready for use. Applicable by brush or spray, it can be diluted according to the need for use up to a maximum of 50% with turpentine

NATURAQUA WHITE Enamel is a ready-to-use, eco-friendly and odorless product, very easy to apply even vertically, suitable for any type of support, indoors and outdoors with low VOC.
It creates a decorative, water-repellent and weather-resistant film, with low yellowing. Thanks to the special formulation with light-resistant pigments and UV filters, it creates a long-lasting protection. Smooth and elastic, it is characterised by excellent distension and rapid drying, it does not drip. Has an anticorrosive effect.

FIELDS OF APPLICATION
The NATURAQUA WHITE multisurface enamel has a high density, boasts high filling and covering capacity.
It is recommended for finishing or maintenance of wooden, metal surfaces as well as walls. In the 00 gloss version it is perfect for wall use.

It's a ready to use binding resin for the individual preparation of Borma Holzmasse. Pasted together with wood sawdust obtained from sanding, it allows to obtain a spreadable paste easily. The binding resin does not change the original colour of the wood and therefore the paste has the same tone of the wood from which the powder has been obtained. The paste can be tinted over or varnished over with both solvent and water based products.

Waterbased Regenerative Treatment for Flooring

Ecological and hypoallergenic formula based on precious waxes and polymer dispersed in water.
It is VOC-free, easy-to-use, evenly sets, rapidly dries and restores the tone and flexibility to a varnished wood flooring.
Renews treated surfaces that will retain clarity, resistance and the ease of cleaning for a longer period of time.

Recommendations for application:
Odourless and colourless.
To be used undiluted on deteriorating surfaces; for normal, daily maintenance it should be diluted with water or added in small amounts (1%) to cleaning water.
Available in glossy, or matt gloss levels.

Recommendations for application:

Apply evenly and avoid overlapping. Wait for complete drying.
Approx. yield: 60-70m2/Lt.

According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product.

Waterbased Sanitizing and Regenerative Polish for Wood-floors

Transparent bottom water-based varnish for varnishing any type of indoor wood. Special for the treatment of the furniture before Naturaqua Mobilack. Yield: 8 - 12 m2 / Lt Operating temperature: + 5° C / + 30° C For interiors. Ready to use as a single-component product, it can also be catalyzed by adding the Borma 4100-2K catalyst for water-based lacquers, in a 10: 1 ratio. Excellent transparency and elasticity, thanks to its easy-to-apply brush texture even on vertical surfaces. Ideal for furniture, doors, skirting boards, paneling.