Finishing oil for interiors with a natural matt effect, characterized by low yellowing. Available in white and transparent.

Allows you to get full finishes or decapé effects on furniture, floors, interior wood coatings in general.

Finishing oil for interiors with a natural matt effect, characterized by low yellowing. Available in white and transparent. It allows to obtain full finishes or decapé effects on furniture, floors and interior wooden surfaces in general. Fast drying formulation.

Water-based dye, ready to use with positive effect (strong highlighting of the wood structure).
It is applied on a rough surface. Special for soft woods, only for interiors.

Fine powders of pure metal alloys, ideal for giving special metallized effects to any type of surface. Easy to use, they are perfectly mixable with each other and allow to obtain infinite shades of color. The powders can be mixed with the products of the Borma range of Oils, Waxes, Shellac polishes

Bi component varnish for parquet which guarantees maximum opacity and maximum scratch resistance, without the surface polishing phenomena common in opaque finishes. Ideal for all surfaces subject to particular wear. Catalysis ratio 100: 20 with the related catalizzatore.

Eco-compatible finish for the treatment and active cleaning of furniture.

It respects the environment, workers health and protects user's health thanks to its water base, almost non-existent VOC content and iG PURE innovative technology.

Mobilack develops very high levels of protection against wear, abrasion and bacteria thanks to the controlled release of Silver ions.

High performance with the ease of use of a single component and self-regenerating protection.

By need or aim, Mobilack can be further improved in performances by adding its specific hardener,(two component).Hardener addition ratio is 10%.

Available in gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%.

Recommendations for application:

The product can be applied by Brush, Spray or Roller directly on sanded raw wood or on water-based or oil-based basecoats.

It can be applied on Borma Oil finishes as well, prior a proper sanding.

Approx yield: 10-14 m2/Lt.

Sanitizing waterbased Furniture lacquer

Water-based wax finish for furniture. To be applied on a rough surface, special for soft woods. Highlight the structure of the wood (positive effect). For interiors only.

Water-based high resistance eco-friendly lacquer ideal for the treatment and active cleaning of wooden floors.

It develops high levels of performance against wear and abrasion, as the innovative iG PURE technology grants additional sanitary protection.

Suitable for all types of wood, being self-sealer it does not necessarily require a specific primer.

Latest generation solution, self-regenerating protection with controlled Silver ions release.

Ready for use, (one component), can be easily spread on any treated surface.

On demand it can be further improved in performance by adding its specific hardener, (two component).

Hardener addition ratio is 10%.

Available in gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%.

Recommendations for application:

The product can be applied by brush or roller directly on sanded raw wood or on water-based, oil-based basecoats or oil-based finishes from Borma range.

Approx. yield: 10-14 m2/Lt

Sanitizing waterbased Parquet lacquer

Natural oil based treatment, reinforced with high quality resins, for the finishing and active cleaning of wooden floors.

It provides an excellent resistance to stains and wear and is enhanced with iG PURE technology of controlled Silver ions release.

It does not need specific basecoats and is ready-to-use.

Available in the following gloss levels: natural effect 5% - deep matt 10% - matt 30% - semiglossy 60% - glossy 90%. Latest generation solution, self-regenerating protection, high viscosity.

Not flammable, free form any transport limitation.

Recommendations for application:

The product can be applied by brush, roller, rag or spray.

Always provide proper ventilation to the treated areas to allow the correct drying process of the oil.

Two-component one-coat oil for the finishing of all wooden surfaces both indoors and outdoors. Mix of natural oils, zero emissions, 100% solid content, to be cured at 30%. Easy to apply (manual or with single-brush), it allows to treat all surfaces both indoors and outdoors with excellent levels of protection. To be used in combination with the relatedcatalizzatore in rapporto 100:30.