Odourless, light-stable and ecological water-based putty for wood. The white version is also suitable for smoothing plaster. Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.
Special putty in powder form with wood flour specific for wooden surfaces, can also be used on wall supports. To be mixed with water, it is ideal for grouting wood imperfections and for reconstructing missing parts. It adheres perfectly to all surfaces. Colors resistant to light. Can be overpainted with PU, acrylic, epoxy, UV and water-based paints.
ECO SEAL 300kx is an elastic high-quality sealant special for the sealing of joints between all kinds of varnished woodwork. Excellent adhesion on porous surfaces, almost odorless, solvent free and free of other dangerous substances, easy to use. Overcoatable.
USE: suitable for the sealing of joints between separate supports and walls, perfect for hardwood, laminate, parquet, plywood, skirting boards and wooden stairs, windows and frames. Guarantees the sealing of joints with movement of up to 5-10%. To be applied to a clean, dry, dust- and grease free surface. Temperature resistance: from -20°C to +75°C. Application temperature: form +5°C to +40°C.
The ideal product for the total cleaning of all wooden surfaces. With speed and absolute effectiveness it attacks the old layers of wax removing any dirt, dust and ingrained debris without the potential of damage to the underlying lacquers
It is a detergent based on natural soap with a neutral pH, for the cleaning of varnished or oil-treated wooden floors. Pleasantly scented, it removes dirt and grease, without damaging the varnishes, cleaning them effectively but at the same time gently. Suitable for daily cleaning
ECOSEAL 500 is a one-component, elastoplastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to medium stress. It is ready to use and effectively seals joints inside and outside, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Good mold resistance.
FIELDS OF APPLICATION Inside and outside joints, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood.
For extraordinary maintenance of indoor wood, the regenerating oil for interiors is perfect for the care and restoration of any surface previously treated with Borma oils. Easy to apply, it nourishes the wood and renews the existing protective layer. It gives a pleasantly satin look and enhances the natural beauty of wood. Apply with a brush or rag without leaving excess. Only one coat is sufficient for normal maintenance. Allow to dry completely before reusing the surface. Indicative yield: 30-40m2 / Lt.
It is a special mixture of natural and synthetic waxes, of high transparency, particularly suitable for the treatment of Venetian stucco, parquet, marble and indoor metal. Its neutral base allows it not to alter the original color over time of the treated surface, as it is not subject to yellowing.
It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.