For extraordinary maintenance of indoor wood, the regenerating oil for interiors is perfect for the care and restoration of any surface previously treated with Borma oils. Easy to apply, it nourishes the wood and renews the existing protective layer. It gives a pleasantly satin look and enhances the natural beauty of wood. Apply with a brush or rag without leaving excess. Only one coat is sufficient for normal maintenance. Allow to dry completely before reusing the surface. Indicative yield: 30-40m2 / Lt.

It is a special mixture of natural and synthetic waxes, of high transparency, particularly suitable for the treatment of Venetian stucco, parquet, marble and indoor metal. Its neutral base allows it not to alter the original color over time of the treated surface, as it is not subject to yellowing.

Two-component polyurethane varnish, self sealer for parquet. High performance, for professional use. Available in different gloss levels.

Catalysis ratio: 1:1

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt

Standard
Cod. 0490-90
Cod. 0491-90

Opaco
Cod. 0490-30
Cod. 0491-30

Opaco profondo
Cod. 0490-10
Cod. 0491-10

Special polishing wax for parquet, based on pure bees wax and carnauba. Ideal for the natural finishes of oil-treated surfaces or for the maintenance of varnished parquet. Silicon-free. It easily nourishes and protects all wood surfaces, giving a pleasant and soft veil with antistatic properties. The reusable beeswax for parquet, pigmented with stable and light-resistant colors, is ideal for the restoration of old parquet floors and for special effects.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.

It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.

Special oil for raw wood. Neutral or colored, it is an excellent base in the oil finishing cycles of furniture and floors. Allows to dye easily and evenly over large areas. Colors resistant to light.

Transparent water base for the treatment of all types of wooden parquet. Special for the pre-finishing treatment with Naturaqua Parkettlack. For interior. Ready to use as a single-component product, it can also be catalysed with the Borma 4100-2K catalyst for water-based lacquers, in a ratio of 10: 1. Excellent transparency and elasticity, thanks to its consistency it is easy to apply both by brush and roller.