Classic protective and decorative impregnating agent, for interiors and exteriors, odorless, with medium dry residual and easy to apply. It gives color to the wood, enhancing its structure. Contains UV filters and additives that provide effective protection against harmful wood agents. Light resistant colours. Good resistance to weathering. Applicable with brush, spray, immersion. Holz Lasur is characterized by an excellent penetration capacity.
- Reduced price
Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation. Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking. Massage the surface with a brush or brush until the surface is still wet. The result is immediate. If necessary, repeat the operation.
Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents. Application in two coats is recommended. For greater resistance of the coating, apply Holz Lasur as a first coat. Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.
Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.
High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
Dekorwachs Lasur Solid is a waxy satin finish for interior and exterior, available in a special series of bright or pastel colors, with excellent covering power and high resistance to light. The product is ready for use, shows excellent elasticity and does not undergo exfoliation phenomena over time. Based on natural oils, high quality resins, UV filters and preservatives, it protects the wood from biological agents and weather. The product is easy to apply, does not drip even when applied on vertical surfaces. Application in two coats is recommended. To renew the coating, simply apply one coat to the clean, dry surface. No sanding needed
It allows intensive cleaning of the wood, removing stubborn dirt and residues of previous oil-based or impregnating treatments. It is also used to degrease exotic timbers particularly rich in oils and extracts. In this case it is recommended to dilute the product with water 1: 1. Wet the substrate with plenty of water before treatment. Due to the high concentration of active ingredients, Extra Strong Wood Cleaner can alter the natural color of the wood making it darker. To restore the original color of the wood, use Exterior Wood Cleaner later.
The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the graying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the application of oils and any other finishing. The product can also be used as a pre-treatment before impregnating, enamels or oils. Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.
Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.