Semi-covering water-based stain. Suitable for indoor raw wood.

Formulated in compliance with the most ancient traditions of furniture restorers, based on Judaic bitumen, it is the ideal way to easily provide to each wood surface an antique and patinated appearance. Almost odorless, it is ready to use, easy to apply. Once dry it allows an easy processing with pad for pleasant custom shades.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Water-based dye, ready to use with positive effect (strong highlighting of the wood structure).
It is applied on a rough surface. Special for soft woods, only for interiors.

Suitable as a preliminary treatment for rough or sanded wooden houses, garden sheds, bridges, outdoor wooden structures, but also for windows, external doors, cladding, fences, etc.

Easy application

DESCRIPTION

Protective waterborne stain with anti-woodworm developed mainly for the treatment of wooden houses, suitable for any pre-treatment of outdoor wooden items. NF01A This waterborne protective primer prevents from attacks by molds, fungi, insects, moths and mites during the construction period when the house is left without finishing.

After normal wear due to atmospheric agents over a medium-long period of time, NF01A is exhausted, but the wood has remained protected while maintaining its original color and is sufficiently saturated not to require an additional primer. With this product, the wood can dry properly and reach its final volume without being consumed by atmospheric agents.

CERTIFICATIONS & COMPLIANCE

Broad spectrum protection against blue stain fungi according to European standard EN 152 and insect protection according to EN 46, EN118, EN84 and EN73.

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Water-based wax finish for furniture. To be applied on a rough surface, special for soft woods. Highlight the structure of the wood (positive effect). For interiors only.

It's the ideal product for staining any kind of wood exalting its structure. For Indoor use. Ready to use and fast drying. Specially formulated to stain raw barewood or stripped wood during restoration, they are usually applied before the traditional final lacquering, giving a pleasant color tone. Highly shiny, they enhances the woodgrain, penetrating deeply.

Special oil for raw wood. Neutral or colored, it is an excellent base in the oil finishing cycles of furniture and floors. Allows to dye easily and evenly over large areas. Colors resistant to light.

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.