This is a special 100% polypropylene wax powder ready for use. Solvent-free, inert and odorless, it is formulated to obtain a better anti-slip effect on traditional line finishing oils. Given its particular spherical microstructure it does not significantly alter the aesthetic appearance of the applied product, and being insoluble does not alter color and consistency.
Ready-to-use water-based enamel, ecological and odorless, easy to apply, suitable for any type of support, indoors and outdoors. High density, it is recommended for finishing or maintenance of wood, iron, masonry etc. surfaces. It does not require a specific primer for wood, but it is possible to consider the use of the Water Undercoat (code NAT6910) or the rustproof Undercoat (code 6915)
Suitable for all types of wood finishes. Ideal for ordinary cleaning of decking, fencing, furniture and other exterior surfaces, oiled or painted. Effectively removes dirt and grease without damaging the wood. Suitable for daily use. Dilute the product in water.
Designed to protect wooden structures before final painting as a surface barrier. A waterbased, odourless and quick-drying Primer formulated to protect newly built, wooden structures while waiting for the subsequent finishes. It provides effective protection against mildew, fungi formation and insect infestation, even in the absence of other treatments. It does not change the colour of the wood and allows the subsequent application of any finish. Recommendations for application: The product can be used as a pre-treatment before exterior woodstain products, lacquers or finishes in general.BR> Thanks to the high content of active ingredients, it is recommended for waterbased finishing cycles to guarantee greater protection and prolong the duration of the coating. For Exterior use.
Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.
Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.
Ready to use, Odourless, it is ideal for lightening and uniforming the tone of each type of wood, both indoors and outdoors. Good bleaching power. The intensity of the effects can be managed by simple dilution with water. Application by brush or spray. Keep from freezing.
Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.
High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation. Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking. Massage the surface with a brush or brush until the surface is still wet. The result is immediate. If necessary, repeat the operation.