3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Water-based primer for the pretreatment of wooden surfaces. It is ideal as a first basic treatment especially on woods with a high tannin content. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

Special hardener for two-component oil (Parquet Oil 2k and Hardwax Parquet Oil 2K); to be used in a ratio of 100: 10 or 100: 30.

Regenerates every type of surface, giving additional protection to the original oil finish of the product. The presence of UV filters and special additives protect the wood from harmful agents, direct sunlight and bad weather. Enhances its natural beauty with a natural satin effect.

Special waxy impregnant agent with sealing purposes for wooden surfaces that have been bleached with Sbiancante bicomponente.

Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation.
Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking.
Massage the surface with a brush or brush until the surface is still wet. The result is immediate.
If necessary, repeat the operation.

It allows intensive cleaning of the wood, removing stubborn dirt and residues of previous oil-based or impregnating treatments. It is also used to degrease exotic timbers particularly rich in oils and extracts. In this case it is recommended to dilute the product with water 1: 1. Wet the substrate with plenty of water before treatment. Due to the high concentration of active ingredients, Extra Strong Wood Cleaner can alter the natural color of the wood making it darker. To restore the original color of the wood, use Exterior Wood Cleaner later.

Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents.
It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors).
The addition of pigments increases the duration of the coating.

NATURAQUA WHITE Enamel is a ready-to-use, eco-friendly and odorless product, very easy to apply even vertically, suitable for any type of support, indoors and outdoors with low VOC.
It creates a decorative, water-repellent and weather-resistant film, with low yellowing. Thanks to the special formulation with light-resistant pigments and UV filters, it creates a long-lasting protection. Smooth and elastic, it is characterised by excellent distension and rapid drying, it does not drip. Has an anticorrosive effect.

FIELDS OF APPLICATION
The NATURAQUA WHITE multisurface enamel has a high density, boasts high filling and covering capacity.
It is recommended for finishing or maintenance of wooden, metal surfaces as well as walls. In the 00 gloss version it is perfect for wall use.

Fast-drying, self-sealing anti-rust enamel. 

Ideal for outdoor service iron and wooden manufactured products. 

Protects them from corrosion and bad weather, guarantees high coverage and uniformity.

To be used in metalworks, agricultural and transport machinery.