High solid water-based sealer, special for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV rays. The product can be colored with Waterbased Pigments. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.
It is a decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection without exfoliation and with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents. The product is characterized by an extreme ease of application, even if colored, and maintenance (it does not require sanding).
Naturaqua Genesis is a ready-to-use water-based covering enamel available as standard in the matt 25 gloss version. Thanks to the new latest-generation formulation, it adheres to every surface and offers high performance in terms of chemical and mechanical resistance: it is stain-proof, non-yellowing, water-repellent, scratch-proof.
Naturaqua Genesis also stands out for its application characteristics: excellent flow, rapid drying, high coverage in one coat, high levelling power. During the surface preparation phase, it does not require the application of special primers. It is a washable product. The water- based technology makes the product odourless, low VOC emissions and perfect for interior application
The thermo-treated wood is characterized by a very high density, which often prevents the correct adhesion of conventional finishing products. Thermowood Oil based on raw materials from renewable sources is specifically formulated to penetrate deeply and therefore be well absorbed even by difficult substrates with minimal wettability. Enriched with UV filters and protective wood additives, it creates a wear-resistant protective film, ideal for all thermo-treated outdoor wooden items, including flooring, terraces and bridges. Application in at least two coats is recommended. 1) In case of particularly compact surfaces, for the first coat Thermowood Oil can be diluted from 20% to 30% with Solvoil 06, a slow drying solvent. Proceed with the application of subsequent coats without dilution. 2) To obtain a marked decorative effect, proceed with finishing with a final coat of Decking Oil - Danish Oil.
High performance waxed high finish impregnating with semi-gloss effect. Impregnates, protects and decorates. It does not need intermediate sanding and is renewed with a simple overlay. Suitable for external wooden cladding, fences, window frames, pergolas, etc.
(Interior/Exterior use) An alkyd-urethane based wax finish offering long term durability for interiors and exteriors. It enhances the wood grain with natural and bright colours, deeply penetrating the wood. Water repellent, breathable and containing UV filters it protects the wood from atmospheric agents. Additionally, it contains antiseptic additives to protect the wood against harmful biological agents. Application of two coats is recommended. To renew the coating, simply apply a coat on the dry and clean, preliminary sanded surface. Recommendations for application: To enhance coating performances, apply Holz Lasur as a first coat..
Transparent protective treatment for metals, even when oxidized with the Cor-Ten method. Enriched with vegetable oils and UV filters, it gives a pleasant satin finish.
.With low environmental impact. Almost odorless, highly transparent, it protects all types of wood. Characterized by a rapid drying, it gives the wooden surfaces a pleasant decorative effect. UV filters and special additives make it suitable for outdoor use. R ecommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient: Holz Lasur, Holzwachs Lasur, Teak Oil and Terrace OIl.
For cladding, roofing, windows and fences Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours. Thixotropic, it gives excellent coverage and is highly resistant to light. The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time. With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product is easy to apply and does not drip even when applied on vertical surfaces. Recommendations for application: Application of two coats is recommended. To renew the coating, simply apply a coat on the dry and clean surface. No need to sand.
