Waterbased exterior woodstain. It penetrates into the fibers, providing a first protection. Indoor and outdoor use. Complete the working cycle with the desired finish (e.g. Naturaqua Top Gel).

Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Suitable as a preliminary treatment for rough or sanded wooden houses, garden sheds, bridges, outdoor wooden structures, but also for windows, external doors, cladding, fences, etc.

Easy application

DESCRIPTION

Protective waterborne stain with anti-woodworm developed mainly for the treatment of wooden houses, suitable for any pre-treatment of outdoor wooden items. NF01A This waterborne protective primer prevents from attacks by molds, fungi, insects, moths and mites during the construction period when the house is left without finishing.

After normal wear due to atmospheric agents over a medium-long period of time, NF01A is exhausted, but the wood has remained protected while maintaining its original color and is sufficiently saturated not to require an additional primer. With this product, the wood can dry properly and reach its final volume without being consumed by atmospheric agents.

CERTIFICATIONS & COMPLIANCE

Broad spectrum protection against blue stain fungi according to European standard EN 152 and insect protection according to EN 46, EN118, EN84 and EN73.

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

High performance waxed high finish impregnating with semi-gloss effect. Impregnates, protects and decorates. It does not need intermediate sanding and is renewed with a simple overlay. Suitable for external wooden cladding, fences, window frames, pergolas, etc.

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

For cladding, roofing, windows and fences
Naturaqua Dekorwachs Lasur is a high-solid content, satin, water-based finish, suitable both for interiors and exteriors, in a special range of bright or pastel colours. It has excellent coverage power and high resistance against light.
The product, ready for use, demonstrates excellent elasticity and is fast drying. With a high-quality resin base, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions. The product, is easy to apply and is non-drip.
Recommendations for application: For long term durability a minimum of two coats is recommended by brush or spray application. The level of protection offered by DEKORWACHS LASUR and NATURAQUA DEKORWACHS LASUR is very similar, however , when maintenance is required, the waterbased version requires intermediate sanding between the coats.