3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.
Classic protective and decorative impregnating agent, for interiors and exteriors, odorless, with medium dry residual and easy to apply. It gives color to the wood, enhancing its structure. Contains UV filters and additives that provide effective protection against harmful wood agents. Light resistant colours. Good resistance to weathering. Applicable with brush, spray, immersion. Holz Lasur is characterized by an excellent penetration capacity.
- Reduced price
Blend of waxes, resins and natural oils for the correct finishing of external treatments. It is a transparent oil recommended as a finish after coloring. Thanks to its special UV filters, it constantly prolongs the life of colored and untreated wood, avoiding greying and oxidation. Does not drip.
Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents. Application in two coats is recommended. For greater resistance of the coating, apply Holz Lasur as a first coat. Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.
Dekorwachs Lasur Solid is a waxy satin finish for interior and exterior, available in a special series of bright or pastel colors, with excellent covering power and high resistance to light. The product is ready for use, shows excellent elasticity and does not undergo exfoliation phenomena over time. Based on natural oils, high quality resins, UV filters and preservatives, it protects the wood from biological agents and weather. The product is easy to apply, does not drip even when applied on vertical surfaces. Application in two coats is recommended. To renew the coating, simply apply one coat to the clean, dry surface. No sanding needed
Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.
Colorless, non-peeling waterbased finish for wood, based on high-flexibility resins for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m² / Lt Operating temperature: + 5? ? C / + 30? ? C Use: Indoor / Outdoor With UV filters. The precious substances that compose it combined with UV filters, prevent the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application. It does not contain Lindane and PCP
High quality paint, ready to use, with excellent elasticity and high filling power. Prevents cracking and detachment. Suitable for both indoor and outdoor use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and weather. For the preliminary coloring of the surface it is possible to apply the Holz Lasur primer, then proceed with finishing with two coats of Flatting Extra Marine. To implement its durability, Flatting Extra Marine can be directly colored with Oil Pigments. SPECIAL FOR NAUTICS (INTERNAL / EXTERNAL USE)
Self-sealing finish for exterior wooden cladding. It impregnates, protects and decorates with opaque colours. Odourless and fast drying.