Ideal for protection and wood colouration
Protective and decorative exterior woodstain for interiors and exteriors with depth wetting properties.
It colours the wood, enhancing the grain.
It contains UV filters and antiseptic additives that provide effective protection against fungi and insects.
Colours are light resistant and have good resistance to atmospheric agents.
Recommendations for application:
Naturaqua Holz Lasur colours are normally brighter, however solvent-based Holz Lasur is characterised by a better penetration and protection capacity. Apply by brush, spray, dipping.

Special waterbased finish, which reproduces the traditional colors of gilding. Ready to use, it can be used on wood, walls and metal.. It offers excellent coverage and pleasant shine. Outdoor use.

Single-component water-based detergent based on organic active ingredients. It allows to effectively clean and prepare the surface before subsequent treatments, removing dirt residues and lightening the color of the wood. Specific for outdoor use, it is recommended to rinse the surface after application. Specially designed for outdoor use.

Water based detergent to restore wood to its natural color. It removes the gray patina caused by the decomposition of lignin under the action of ultraviolet radiation.
Apply on the wet surface, leave for 5 minutes, then clean the wood with a stiff brush. Rinse with water after application. Ideal for coverings, garden furniture, fences, decking.
Massage the surface with a brush or brush until the surface is still wet. The result is immediate.
If necessary, repeat the operation.

It allows intensive cleaning of the wood, removing stubborn dirt and residues of previous oil-based or impregnating treatments. It is also used to degrease exotic timbers particularly rich in oils and extracts. In this case it is recommended to dilute the product with water 1: 1. Wet the substrate with plenty of water before treatment. Due to the high concentration of active ingredients, Extra Strong Wood Cleaner can alter the natural color of the wood making it darker. To restore the original color of the wood, use Exterior Wood Cleaner later.

(Interior/Exterior use)
An alkyd-urethane based wax finish offering long term durability for interiors and exteriors.
It enhances the wood grain with natural and bright colours, deeply penetrating the wood. Water repellent, breathable and containing UV filters it protects the wood from atmospheric agents.
Additionally, it contains antiseptic additives to protect the wood against harmful biological agents.
Application of two coats is recommended. To renew the coating, simply apply a coat on the dry and clean, preliminary sanded surface.
Recommendations for application:
To enhance coating performances, apply Holz Lasur as a first coat..

High-performance two-component paint for exterior surfaces. Available in different gloss levels. To be used with the related catalilyst.

Catalysis ratio: 1:1

For professional use..

A high-performance 2- component, polyurethane based Primer with preservative and insulation properties ideally suited

to resinous woods. Fast drying and with excellent sanding it is perfect for closed / semi-closed pore finishes. The cycle can be

completed with Exterior Wood Lack 2k, Naturaqua Exterior Wood lack 2k or Decking Oil HD.

Recommendations for application:

It can be applied by brush, roller or spray. Suggested for professional use.

Catalysis ratio: 1:1

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

FIRST AID – A:
1 box of Softwax in 20 assorted colours 1 box of Profix touch-up dye pens in 10 assorted colours, 2 bottles (30ml) of Fixative (1x20%, 1x40%)
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – B:
2 boxes of Hard Wax in 20 assorted colours; 1 box of Holzmarker colour touch-up markers in 10 assorted colours; 1 Gas Flint Borma gas heating iron for wax fillers
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – C:
1 box of Softwax in 20 assorted colours; 1 box of Holzmarker colour touch-up markers in 10 assorted colours, 2 bottles (30ml) of Fixative (1x20%, 1x40%)
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm

FIRST AID – D:
2 boxes of Hard Wax in 20 assorted colours; 1 box of Profix staining touch-up pens in 10 assorted colours, 1 Gas Flint Borma gas heating iron for wax fillers
Accessories: 3 Very fine white abrasive pads (12x14), 10 Work cloths, 1 Plastic Spatula 5 cm