ECO SEAL 300kx is an elastic high-quality sealant special for the sealing of joints between all kinds of varnished woodwork.
Excellent adhesion on porous surfaces, almost odorless, solvent free and free of other dangerous substances, easy to use.
Overcoatable.

USE: suitable for the sealing of joints between separate supports and walls, perfect for hardwood, laminate, parquet, plywood, skirting boards and wooden stairs, windows and frames.
Guarantees the sealing of joints with movement of up to 5-10%. To be applied to a clean, dry, dust- and grease free surface.
Temperature resistance: from -20°C to +75°C.
Application temperature: form +5°C to +40°C.

ECOSEAL 500 is a one-component, elastoplastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to medium stress. It is ready to use and effectively seals joints inside and outside, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Good mold resistance.

FIELDS OF APPLICATION
Inside and outside joints, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood.

The ideal product for the total cleaning of all wooden surfaces. With speed and absolute effectiveness it attacks the old layers of wax removing any dirt, dust and ingrained debris without the potential of damage to the underlying lacquers

It is a detergent based on natural soap with a neutral pH, for the cleaning of varnished or oil-treated wooden floors. Pleasantly scented, it removes dirt and grease, without damaging the varnishes, cleaning them effectively but at the same time gently. Suitable for daily cleaning

For extraordinary maintenance of indoor wood, the regenerating oil for interiors is perfect for the care and restoration of any surface previously treated with Borma oils. Easy to apply, it nourishes the wood and renews the existing protective layer. It gives a pleasantly satin look and enhances the natural beauty of wood. Apply with a brush or rag without leaving excess. Only one coat is sufficient for normal maintenance. Allow to dry completely before reusing the surface. Indicative yield: 30-40m2 / Lt.

It is a special mixture of natural and synthetic waxes, of high transparency, particularly suitable for the treatment of Venetian stucco, parquet, marble and indoor metal. Its neutral base allows it not to alter the original color over time of the treated surface, as it is not subject to yellowing.

Mixture of detergent surfactants in water. Highly concentrated, can be diluted up to six times with water (1: 6). Easily removes old wax layers. Sanitize in depth.

It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt

Standard
Cod. 0490-90
Cod. 0491-90

Opaco
Cod. 0490-30
Cod. 0491-30

Opaco profondo
Cod. 0490-10
Cod. 0491-10

Special polishing wax for parquet, based on pure bees wax and carnauba. Ideal for the natural finishes of oil-treated surfaces or for the maintenance of varnished parquet. Silicon-free. It easily nourishes and protects all wood surfaces, giving a pleasant and soft veil with antistatic properties. The reusable beeswax for parquet, pigmented with stable and light-resistant colors, is ideal for the restoration of old parquet floors and for special effects.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.