Odourless, light-stable and ecological water-based putty for wood. The white version is also suitable for smoothing plaster. Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.

Special putty in powder form with wood flour specific for wooden surfaces, can also be used on wall supports. To be mixed with water, it is ideal for grouting wood imperfections and for reconstructing missing parts. It adheres perfectly to all surfaces. Colors resistant to light. Can be overpainted with PU, acrylic, epoxy, UV and water-based paints.

ECO SEAL 300kx is an elastic high-quality sealant special for the sealing of joints between all kinds of varnished woodwork.
Excellent adhesion on porous surfaces, almost odorless, solvent free and free of other dangerous substances, easy to use.
Overcoatable.

USE: suitable for the sealing of joints between separate supports and walls, perfect for hardwood, laminate, parquet, plywood, skirting boards and wooden stairs, windows and frames.
Guarantees the sealing of joints with movement of up to 5-10%. To be applied to a clean, dry, dust- and grease free surface.
Temperature resistance: from -20°C to +75°C.
Application temperature: form +5°C to +40°C.

ECOSEAL 500 is a one-component, elastoplastic sealing putty based on acrylic aqueous dispersion, which is designed for joints between construction parts exposed to medium stress. It is ready to use and effectively seals joints inside and outside, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood. Good mold resistance.

FIELDS OF APPLICATION
Inside and outside joints, porous surfaces such as concrete, plaster, asbestos, brickwork, cement, wood.

Ready-to-use binder resin for the individual preparation of quick drying wood putty.
Mixed with wood dust from the sanding process it enables a filler matching the original Colour of the wood to be obtained.
Any customised colour shades can be achieved with the addition of a few drops of the Borma Holzfarbe Wood Concentrate dyes. Use water for thinning/dilution.

Practical and easy to handle, it simply requires two AA batteries and allows correct and effective application of the Hardwax touch up sticks

Two-component filler using extra fine wood flour. Easily sandable, it has perfect adhesion on any substrate. Indoor / outdoor use.

The product is sold with the catalyst which can also be purchased separately.

1650XX 750 ml. can

1680XX 820 ml. cartridge

Electric fuser with easy-to-use heat dimmer for the correct application of Hardwax filler. Respects colors, does not burn paints. Particularly useful where free flames and sparks are not allowed, as in painting booths. P>

1960D DOSING GUN FOR K2 MDF - Basic
Dispenser for K2 MDF cartidges with stable catalysis ratio. Very easy use

1960P DOSING GUN FOR K2 MDF - with catalysis ratio modifier
Dispenser for K2 MDF cartridges with modifiable catalysis ratio. Extremely useful.

The Borma gas flint is the ideal tool for the application of Hardwax thanks to its robustness, versatility and small size. It is powered by common butane gas and easily rechargeable through the rear valve.