Special aerosol touch-up varnish for wood. Fast-drying. Durable and easy to use. Resistant to light it allows a fast and efficient retouch on any external or internal wooden surface.

Water-based dye, ready to use with positive effect (strong highlighting of the wood structure).
It is applied on a rough surface. Special for soft woods, only for interiors.

Non-yellowing high-solids transparent spray. Available in different glosses to restore previous coatings.

For professional use.

It is a special lubricating oil for shellac finishes. Ready to use, almost odorless, non-toxic. Poured in drops in padding applications, it facilitates smoothness and hinders the natural adhesion of the pad to the support, increasing the workability time.

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative fornatural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

Top quality transparent shellac basecoat. Produced with natural dewaxed Shellac, thanks to its transparency, it is ideal as a first coat in wax or shellac treatments on light Pine type woods, etc. Completely formulated with natural products, it is ready to use, fast drying and of considerable adhesion.

It's a ready to use binding resin for the individual preparation of Borma Holzmasse. Pasted together with wood sawdust obtained from sanding, it allows to obtain a spreadable paste easily. The binding resin does not change the original colour of the wood and therefore the paste has the same tone of the wood from which the powder has been obtained. The paste can be tinted over or varnished over with both solvent and water based products.

Based on waxes and natural oils, the product combines the ease of application of paste wax with the resistance of oil. Colorless, it is used to blend the effects obtained with colored waxes and to give surfaces greater protection, water repellency and hardness. Ideal for the easy restoration of oiled supports that have become brittle over time. Spread with a cloth or brush in thin and uniform layers. Polish with a soft cloth.
Indicative yield: 20-30m2 / Lt.

Practical and easy to handle, it simply requires two AA batteries and allows correct and effective application of the Hardwax touch up sticks