Wax-effect finish for interior and exterior. Enhances the structure of the wood. Water repellent and breathable, it protects the wood from atmospheric agents, also thanks to UV filters. Contains additives to protect wood from harmful biological agents.
Application in two coats is recommended.
For greater resistance of the coating, apply Holz Lasur as a first coat.
Suitable for ceilings, beams, external cladding, wooden houses, pergolas, fences, etc.

A waterbased acrylic, waxy impregnating self-sealing 3-in-1 finish for interiors and exteriors.
Odourless and dilutable in water it enhances the grain of the wood using natural and bright colours for deep penetration of the wood.
Water repellent and breathable it protects the wood from atmospheric agents. Added UV filters impart light-stability and special additives protect the wood against harmful biological agents. Application of two or three coats is recommended. Recommendations for application:
The colours of Naturaqua Holzwachs Lasur 3IN1 are brighter than the same Holzwachs Lasur 3IN1 oil-wax base.
The level of protection offered by the two products is very similar, however the water-based version needs intermediate sanding between the coats and restoration phase.

Colorless, non-peeling waterbased finish for wood, based on high-flexibility resins for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m2 / Lt Operating temperature: + 5° C / + 30° C Use: Indoor / Outdoor With UV filters. The precious substances that compose it combined with UV filters, prevent the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application. It does not contain Lindane and PCP

Water based finish for exterior wood coatings. Available glossy or mat, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of exterior woodstain Naturaqua Holz Lasur.

3-in-1 oil-wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc.

Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents.
It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors).
The addition of pigments increases the duration of the coating.

(Interior/Exterior use)
An alkyd-urethane based wax finish offering long term durability for interiors and exteriors.
It enhances the wood grain with natural and bright colours, deeply penetrating the wood. Water repellent, breathable and containing UV filters it protects the wood from atmospheric agents.
Additionally, it contains antiseptic additives to protect the wood against harmful biological agents.
Application of two coats is recommended. To renew the coating, simply apply a coat on the dry and clean, preliminary sanded surface.
Recommendations for application:
To enhance coating performances, apply Holz Lasur as a first coat..

For cladding, roofing, windows and fences
Dekorwachs Lasur is a satin waxed finish for interiors and exteriors, in a special series of bright or pastel colours.
Thixotropic, it gives excellent coverage and is highly resistant to light.
The product is ready for use, demonstrating excellent elasticity, without any flaking or detatchment over time.
With a base of natural oils, high quality resins, UV filters and preservatives it protects the wood from biological agents and adverse weather conditions.
The product is easy to apply and does not drip even when applied on vertical surfaces.
Recommendations for application:
Application of two coats is recommended.
To renew the coating, simply apply a coat on the dry and clean surface.
No need to sand.

High performance waxed high finish impregnating with semi-gloss effect. Impregnates, protects and decorates. It does not need intermediate sanding and is renewed with a simple overlay. Suitable for external wooden cladding, fences, window frames, pergolas, etc.

Blend of waxes, resins and natural oils for the correct finishing of external treatments. It is a transparent oil recommended as a finish after coloring. Thanks to its special UV filters, it constantly prolongs the life of colored and untreated wood, avoiding greying and oxidation. Does not drip.